Want to know how to replace your ceramic bathroom towel bar (the annoying ones with the fixed ends!) the easy way? I figured out a super simple how-to fix and am sharing how to get the job done!
post includes affiliate links – see my full disclosure statement {here}
As part of the One Room Challenge budget bathroom remodel, I found a super simple way to replace our old plastic towel bar that had fixed ceramic ends. I’ve had lots of questions about it which kind of surprised me because I figured there weren’t a ton of you who also have these lovely fixed end brackets glued onto ceramic tile (most of you guys have a typical towel bar screwed into drywall, right?). But in other ways I wasn’t so surprised, since I couldn’t find the answer online myself and how to figure my own towel bar replacement out.
This plastic white towel bar is the lovely one that I started with – it was both too short and small in diameter for my fixed towel bar brackets. The white glazing was also starting to chip away (see that beautiful pink peeking out?!) but luckily that was only in the inside of the holder and was covered up once my new towel bar was in place.
Here’s what I did to remove & replace it:
1. Measure For & Buy Your Replacement Supplies
Figuring out the supplies that I needed was the hardest part – once I had them, this was a 10 minute fix. You’ll need two things – a replacement bar and spring-loaded end caps. For the replacement bar, measure to see whether you need a ¾″ or ⅝″ bar and also measure the length that you’ll need and buy a replacement bar that is as long or longer. I needed a ¾″ replacement bar that was at least 22″ long so I ordered {this 24-inch chrome replacement bar}. It’s very lightweight and initially that made me worry that it was cheap and not a good choice but I found that the light weight is necessary to make cutting it to size doable and the bar looks great and is very stable now that it is installed. For spring loaded end caps I ordered {these adjustable towel bar end caps} that just slip right onto the ends of your replacement towel bar:
2. Remove the Old Towel Bar
Now that you’ve got your supplies, it’s time to go to work by removing the old towel bar. I easily pulled my bar out on its own since it was too short to begin with but if yours isn’t, you can remove it by sawing through the middle of it.
Want to save this post?
We'll email this post to you, so you can come back to it later!
3. Cut Your New Replacement Bar to Size
When cutting your replacement towel bar to size, it’s important that you not cut it either too long or too short. Here’s what I did – I put a spring-loaded end cap into one end of my chrome bar and then put that end into one of the fixed wall brackets. I pushed the bar into the bracket as far as it would go and marked the other end of the bar at the spot that it needs to be cut off (just a tad shorter than the inside of the fixed bracket). Use a hacksaw to cut it – it’s actually very easy to saw through.
4. Put the Spring-Loaded End Caps on the Bar Ends & Install It!
After cutting my replacement bar to the correct size, I put the spring-loaded end caps onto both ends of the bar and installed it between the two fixed brackets. Most of you will be done at this point but my bathroom had the extra kicker of having end brackets that were made for a larger than standard towel bar, causing the towel bar to jiggle around in the holder when using the towel. See those lovely gaps between the bar and the inside of the bracket:
My solution to the jiggling bar was to use a sheet of thin white craft foam that is sticky on one side if you pull off the backing – I got mine at Michaels. I cut out eight ⅝″ squares and put them between the towel bar and the bracket. I didn’t peel off the sticky backing and the foam pieces have stayed in place but if they start shifting I can always stick them down. For now all is good with no more jiggling! And fortunately you can only see my retrofit job if you crouch down low and look into the end of the towel bar. So maybe my dog will roll her eyes at my little hack job but no one else will ever see it.
I hope this was helpful to some of you with the same obscure problem that I had! Since you’re fixing up your towel bar you might need some awesome new towels to go on it! Check out my post on the best bath towels at all price points!
Thanks as always for stopping by!
Dit Dragon says
Thank you!, Thank you, Thank you!!!!!!
My daughter broke the towel rod, and your post enabled me to fix it quickly and painlessly.
Kris Jarrett says
I’m so glad that your found my post helpful in fixing your daughter’s towel bar!
Mary says
Great information. My problem is the end of the towel bar is triangle shaped not square. I cant seem to locate anything that is triangle shaped. Any idea would be appreciated. My bathroom tiels were pink. I had them reglazed white, along with the tub came out great.
Kris Jarrett says
I’ve actually never seen that before Mary so unfortunately I don’t have a solution – sorry!
Viunce says
Thank you so much for the post. I see that others are looking for ways to replace worn out towel bars.
Anita alexander says
This looks EXACTLY like our bathroom and exactly the problem we have!! Thank you!
Kris Jarrett says
So glad that you found it helpful!
Deb says
So happy to find this, with great directions and photos! We have a new to us 1895 Victorian with vintage ceramic towel holders, now I can replace the rods without knocking the vintage holders off the wall. Yay!
Kris Jarrett says
So glad it helped – good luck with your reno!
Keris
Mary fillo says
Can you tell me where I can find replacement bars for the ceramic towel racks?
Kris Jarrett says
Hi Mary,
There’s a link to the replacement bar in my post – just click on the highlighted words where it says {this 24-inch chrome replacement bar}.
Frank Person says
Astounding. I have this identical problem. When I googled some derivation of “towel rods”, I never dreamed of finding a completely defined solution with pictures and part #s. MANY THANKS !!!!
Tammy Scott says
Your bars look beautiful, but I can’t make myself cut my 80 yr old wood bars. They are in perfect shape. Did you look for plastic slip covers or anything along those lines, that have a slit down the back that would fit over the wood bar? someone in some year did that to mine, but they are now worn and I cant find them anywhere.
Ann Myslinski says
Thank you for the information in this post as I was able to fix my broken towel rack in my shower!
Kris Jarrett says
Yay! I’m glad you found it helpful Ann!
Jill Novosel says
We just did this following your advice exactly! It worked out perfectly. This was a quick project and gave a polished, updated look. Thank you!
Bob says
Thanks. Exactly what I need. Ours has a wooden bar covered in plastic. The plastic has worn, losing color, and shrunk, revealing the wood. The rest of the bath has chrome fixtures so the chrome replacement will look fine. We had the tooth brush and soap things also. I knocked them out and replaced them with relief tiles from Moravian Tile in Doylestown Pa. Knocking them out felt dangerous but it worked out.
Kris Jarrett says
Glad you found it helpful and so glad to know that you knocked your toothbrush and soap holders off successfully!
Anonymous says
In the close up of the towel bar it appears as though your ceramic wall tile is painted ad the grout lines are exactly the same color and texture as the tile. Is this correct and if so would you address the process by which you painted the tile? Thank you. The entire bath is LOVELY and exceptionally well done!
Kris @ Driven by Decor says
You have good eyes! Yes, the tile was originally pink and was redone. Unfortunately, I don’t have the details of how it was transformed because it was done before we bought the house but I’m pretty sure that it was simply reglazed. If you google it, you’ll find that there are a ton of companies out there that specialize in reglazing tubs and tile – it holds up pretty well and is so much cheaper than replacing the tile. If you want to do it yourself, Rust-Oleum makes a tub and tile refinishing kit that I know other people have used with success but I haven’t had any experience with it personally. Hope that helps!
VEL says
You not only have great taste, your also so ingenious! thanks for sharing!
classic casual home says
You are so amazing. Where there is a will =there is a way…and YOU will find it.
Kris @ Driven by Decor says
I HAD to find a way, right? I mean, did you see how heinous my towel bar was? Kinda embarrassing when guests go to use the hand towel and the bar falls to the floor 🙂
Elizabeth @ The Little Black Door says
I had no idea you could do that! Thanks for sharing.
Lisa @ Shine Your Light says
Excellent post, I love when useful tips like this are addressed. My mom’s bathroom, that I have been working on for months (longest project ever) had one of those exact same tile mounted towel bars, and toilet paper holder. Who knew the cheap plastic bar was replaceable?? Thanks for sharing this handy tip.
Kris @ Driven by Decor says
Thanks Lisa – that’s high praise coming from my QTT friend 🙂