Can you paint tile floors? Yes! I’m sharing how to paint a tile floor so it looks good and lasts! We painted the ceramic tile floors in our bathroom and this simple, inexpensive DIY transformed our space!
Have you ever had a project that ended up being so much easier than you expected that you wished you hadn’t procrastinated so long to do it? Painting the ceramic tile floors in our first floor bathroom was one of those projects!
I decided I was going to figure out how to paint our tile floor way back in 2014 when I was making over my space for the One Room Challenge. But.. the stenciling of the bathroom walls took so long that I ran out of time to do it before my big reveal. Somehow THREE full years went by before I finally knocked this little DIY project. It ended up being so cheap and easy to do and I LOVE the result! Welcome to my its-five-hundred-times-better-than-those-ugly-reddish-floors-were bathroom!

Such a HUGE improvement over the reddish tile we started with, right?!

And believe it or not, the ugly color wasn’t even the worst thing about the old tile floors. Behind both the sink and the toilet, the tile had gross, ugly stains that I couldn’t get off no matter how hard I tried. It was completely gagworthy and something the previous owners hid under a custom cut rug they had in this bathroom when we bought the house:

Now you’d never know that my poor tile had such an ugly past!


It’s been six years now since we painted our tile floors and I would do it all over again! Today, I’m sharing everything you need to know about how to paint a tile floor so it lasts! 🙌🏻 (post includes commissionable links; for more information, see my full disclosure statement {here})
Step 1: Gather Your Supplies
These are the supplies you’ll need to successfully knock this project out:
- Sandpaper (I used 80, 120, and 220 grit) and/or an electric sander (I used {this sander} and {this sandpaper} that fits it.
- Stripper and cleaner (I used {this one})
- Grout or caulk to repair cracked/missing grout (if needed)
- Bonding primer (I swear by {this STIX primer})
- 4″ mini rollers such as {these} that have ¼″ nap
- Mini roller frame
- Paint brush
- Benjamin Moore Floor & Patio Paint
- Polyurethane topcoat (optional)
Step 2: Sand Your Tile Floors
The first step is to lightly sand your tile floors. The purpose is not to remove the glaze on the tile, it’s just to scuff it up which helps the primer adhere. And it also removed the disgusting crap on the surface of my tile that I couldn’t get off no matter what I tried.
It’s important to note that ceramic tile can contain lead so consider testing for it or consulting with a professional if you’re unsure about your tile. Always use protective eyewear and an appropriate mask or respirator to prevent you from breathing in the sanding dust. And contain the dust so it doesn’t go into other areas of the house.
I used {this electric sander} which makes the job so much quicker and easier than doing it by hand. If you do a lot of projects around the house and don’t already have one of these electric sanders, I’d highly recommend it. It’s lightweight, fits in the palm of your hand, and has an angled head to get into corners easily:

I sanded the tiles that had a build-up of crud on them with 80 grit sandpaper, did a light sanding of the whole floor with 120 grit, and then finished off with a quick once-over with a fine 220 grit sandpaper. A variety pack of sandpapers that fit the mouse sander such as {this one} is perfect.
Step 3: Clean Your Floors (Super Well!)
After finishing sanding, I vacuumed up all of the dust and debris and then went to town on cleaning my floors. Any heavy-duty stripper & cleaner should do the job – you can get the one that I used online {here}.

I mixed the cleaner with water (per the instructions), mopped it onto the floor, let it sit for about 15 minutes, and then scrubbed the entire floor with a nylon scrub brush. Then I cleaned it off with bucket of warm water and did it a second time. The cleaner the floor, the better your paint will adhere!
Step 4: Repair any Missing Grout or Cracked Tiles
The grout on our floor was a mess and there are several areas where chunks of it were missing. Regrouting is a pretty huge job since you need to spend a lot of time digging out the old grout first so I went the easy route and simply used paintable caulk to fill in and smooth over any bare spots in my grout. The caulk adhered well and now that it’s painted, you would never know that I had done it.
Now would be the time to replace or repair any cracked tiles too. I had one tile closer to our bathtub with a crack in it but knew it would be covered by our bathroom rug so I simply caulked the cracked portion and sanded down the rough edge a bit instead of replacing it.
Step 5: Apply a Good Primer
Using a really good primer is the key to success for painting ceramic tile! I used INSL-X STIX (available {here}) which is my go-to primer for painting surfaces that paint might normally have a hard time adhering too.
I used a paint brush and small roller simultaneously (I use a ¼ inch mini roller like {these}), painting the edges and grout lines with my brush and then rolling on the primer for the rest. Just make sure to start at the far end of the room and work towards the door so you don’t paint yourself into a corner. Once it was dry, I recoated using the same technique.
Step 6: Paint Your Tile!
I painted our floor tile in the same way as I primed it, using a paint brush on the edges and on the grout and rolling the rest as I went (as with the primer, I used a 4 inch mini roller like {this}):

The type of paint that I used was Benjamin Moore’s Floor & Patio Paint since it’s meant to stand up to lots of use and abuse. It comes in High Sheen and Low Sheen options. I chose Low Sheen just for personal preference.
I applied three coats of paint, letting it dry according to the paint instructions in between coats. The color I chose is Benjamin Moore Platinum Gray, which is the same gray color as the lighter portions of my stenciled walls.
Step 7: Seal Your Tile?
The last step, if you choose to do it, is to seal your tile. I was definitely torn on whether or not to seal mine. With porch paint you technically don’t need to seal it since the paint is made to withstand a lot of wear. The pro of adding a polyurethane topcoat is that it will make your painted tile more durable. The negative is that with a polyurethane topcoat, if you get a gash in your floor that needs to be repaired, it’s a little trickier to fix in a way that it blends in perfectly if you’ve topcoated with polyurethane.
I decided NOT to use a polyurethane topcoat and years later I’m happy with that choice. At one point a deep scratch appeared on one of our tiles that I’m guessing was made by stone getting stuck in someone’s shoe tread while construction was being done on our house. I was able to sand and repaint just that one tile and it blended in perfectly.
I also recoated our painted tile floors a few years after they were first done to freshen them up, and since I had no polyurethane topcoat I didn’t have to do any prepwork to remove it before repainting.
Step 8: Let Your Floor Dry & Then Put It To Use!
After your last coat of paint or polyurethane, give your floor at least a couple of days to fully dry before walking on it. The more humid it is, the longer it will take. It’s best to be gentle with it (no heeled shoes, etc.) for the first week or two until everything is fully cured.
Overall, I’m incredibly happy with how our painted tile floor looks and how it’s worn! Especially for a project that cost me under $100!


It’s fun to look back and see how far this bathroom has come. This is what it looked like when we moved in and the tile was covered by carpet (which I promptly took out because I decided that even the ugliest tile is better than a rug that goes around the toilet – yuck!):

and here it is today:

Powder Room Sources: Damask Wall Stencil (11.25″ x 15.5″) | Arched wood medicine cabinet mirror – no longer available | Pedestal Sink | Sconces (Polished Nickel) | Gray & white striped towel
The best part is that it’s a room we didn’t spend a ton of money on. Other than the money spent on the wood medicine cabinet and sconces, the rest of the changes were accomplished with inexpensive DIY projects. To learn more about our bathroom makeover check out my posts on:
Wall Stencils (yes, those walls are stenciled, not wallpapered!)
How to Replace a Towel Bar with Fixed Ceramic Ends
Also check out my post on our painted bathroom vanity which was another easy painting project that made a huge difference!
UPDATE!! If you’re wondering how our painted tile floors have held up, check out my post how how our painted tile lasted with an update of how they had done years later!
Thanks for stopping by!





Kim Westwood says
Wow!! that looks great. I keep being told you can’t paint floor tiles as it wont last. Well perhaps I will give it a go. Thanks for sharing
Kris Jarrett says
I’m so glad that you found it helpful!
Sarah says
Thanks so much for this. We have some 1960s red pattern tiles in Austria that we are thinking of painting a pale grey over ( concrete colour) and wonder if we can keep the pattern from the tile with a light grey wash. Have you experienced this before?
Kris Jarrett says
Honestly I’m not sure Sarah – I haven’t tried that before!
Pat Johnson says
I want to say that your bathroom is just out of sight! I have read and reread all of this project. But my question is…if the ceramic tile on the floors can be painted this way, then can the ceramic tiles on the wall be done the same?? Thanks for answering and again I must say that room is gorgeous! Pat
Kris Jarrett says
Thank you Pat! I would think that you could paint wall tile the same way as floor tile but I wouldn’t do it for tile exposed to a lot of water like tile in your shower.
Patricia says
Hi Kris , I just happened upon your post about painting your bathroom floor from September 2017 as I am searching for a way to breathe new life into my ceramic tile floors and I have a question for you
How are your tiles holding up after a year and do you regularly use this bathroom ? It looks great and I’m wanting to try it but am concerned about the durability , my bathroom is used daily and of course about 5 feet of the tile is right along the bath tub/shower.
Kris Jarrett says
Hi Patricia, this is our hall bathroom so it does get regular use. A year in, 95% of our tile looks perfect while a few tiles in the most used areas have some signs of wear and scratches. I plan to fix those tiles and give the whole room a single recoat sometime this winter. If I had put a protective coating over the top, I have no doubt it would have worn even better but I’m overall really happy with how it’s held up!
lee joshua horowitz says
Hi! I used the benjamin moree floor paint thank to your recommendation. I’m finding that the floor is sticky and tracks lots of dirt. Any recommendations for poly?
Kris Jarrett says
If it’s sticky and tracking dirt then it’s not completely dry and you need to give it more drying time. It can take a while to dry in hot weather, especially when it’s humid!
Laura says
This looks fantastic! Would you try this for the walls that were tiled to? How well do you think it would hold up in really wet situations like the shower?
How well has it held up? Has it scratched at all?
I love your bathroom!
Kris Jarrett says
I think walls would be fine except those that are exposed to a lot of water – I’m not sure it would hold up somewhere like a shower. There are some minor scratches on the floor around the tile so at some point I’ll give it a fresh top coat but overall it’s help up beautifully!
January Beeler says
Looks fantastic. I’m confused about the before pictures. At the beginning they were a reddish tile and at the end they were blue? What color tile did you paint? The red or blue? Wondering if coats would depend on starting colors because I’m painting over off white.
Kris Jarrett says
The blue is carpet that was over the red tile!
Marsha says
Looks amazing! What would you say about this process for bathroom walls?? My guy has picked a waterproof laminate wood look for the floor, but the walls need some change and we don’t want to rip and redo tile!
Kris Jarrett says
I think it would work fine for the walls too as long as they weren’t exposed to a lot of water like shower walls would be.
Danielle says
How did this hold up to water getting on it.. I used chalk paint and it looks great but if water gets on it it bubbles up instantly..
Kris Jarrett says
We never have standing water in there but it does get wet from people getting out of the shower and it hasn’t been a problem at all!
Kat says
Looks great! Do you think this would hold up in the wall tile (tub/shower) in a guest bathroom that rarely gets used? The tile is ugly plus the grout is badly stained, and I’ve tried everything under the sun to clean/bleach them.
Kris Jarrett says
I’ve never tried using it in an area with so much moisture – I’d be worried about how it would hold up long-term.
Anna says
I’d love to know also!
Anonymous says
The before picture shows blue tile, smaller, than the red you painted???
Kris Jarrett says
That’s carpet that was over the red tile.
Brenda says
This looks wonderful! What was the grit number of the sandpaper used?
Kris Jarrett says
Thank you! I sanded the tiles I had with the crud on them with 80 grit, did the whole floor with 120 grit, and then finished off with a quick once-over with a fine 240 grit.
Billy says
I need help with large tile floor in my kitchen. I would like to paint it if I could. It is the old 1980s style. What would I need to do as in the easy steps that you have done in your bathroom and I am interested in doing the same with my kitchen. Please give me some comments .
KristinaB says
How has your floors held up over time? Considering painting our bathroom floors!
Kris Jarrett says
It’s done really well! After a year there are starting to be just the slightest signs of wear so I might roll a quick recoat layer on to keep it looking good. Still super happy with it!
Chris says
I love it!!
Kris Jarrett says
Thank you!
shelly gilad says
THANKS! So helpful. I was so frustrated with our tiles.Thought there was no hope then found your post.
Kris Jarrett says
So glad you found it helpful!